Unlike a mobile phone, it is not very easy to be carrying an iPad or tablet around with a hand. You’ll need a tablet case. Buying one is cool, but making one is more satisfying and cost-saving.
We've gathered these 30 DIY tablet cases to ease the stress of carrying your tablet. Apart from making carriage easy for you, the tablet case also provides support or protection for your tablet. Are you ready to start crafting? Let’s begin!
Table of Contents
1. DIY Tablet Case
This is made from an old book, elastic, felt, and glue. Remove the book from the cover and line the cover with felt. Attach the tablet to the cover elastic. All the materials used in this project were carefully selected to give the desired result.
2. DIY Fabric Tablet Case
This is made from 2 yards of fabrics, 1 yard of cotton batting, rope trim, and thread. This project requires a lot of time; the time spent on measurement so that the result is accurate, the time spent on cutting fabrics then putting them together for sewing.
3. How To Make A Tablet Case Out Of Fabric
Though a few materials are needed for this project, it requires the basic skill of sewing because you need to stitch the fabrics together to get the desired result. The materials needed are ½ yard of canvas material, 2 snaps, and fusible interfacing.
4. How To Make A Tablet Cover
This is made from paper, cardboard, cloth, glue, and elastic. Trace the dimension of the tablet on cardboard and a sheet of paper. Wrap the cloth around the cardboard with glue. Assemble the cover and attach the tablet to it using elastic.
5. How To Make A DIY Tablet Cover
Using the dimension of the tablet to cut out two cardboards. Cut two thin pieces and one ½ of the tablet size. Glue them on wrapping paper separately leaving a little gap between them. Fold and glue the excess wrap paper to the cardboard.
6. DIY Easy Tablet Cover
In making this, you need cardboard, glue, sticky tape, and a cutter. Trace and cut out the dimensions of the tablet on the cardboard. Cut two pieces of this and join them together to make your tablet cover.
7. DIY Felt Tablet Cover
This is made from felt materials, pins, snaps, and a sewing machine. Cut the necessary pieces and pin them to get her then take them to the sewing machine. Sew the felt and add snap to the appropriate place.
8. DIY Ipad Case
Get an iPad cover then adhere it to a wooden piece. Add mod podge to the wood and smooth the fabric on it. It is made from fabric, mod podge, wood, and a case cover.
9. DIY Tablet Case
Make a design on your canvas, print out the design on fabric, and sew it to give a bag shape. Attach the zipper to it and you're good to go.
10. How To Turn A Book Into A Tablet Case
This is made from an old book, remove the book and leave the cover. Glue a sheet of felt fabric to the inside of the cover. Then, attach the tablet to one side of the book cover.
11. How To Make A Tablet Case With Old Jeans
Get a piece of large cardboard and cut two pieces out of it to size the tablet. Cut out other necessary pieces for the case. Then, get a pair of jeans trousers, cut them, and wrap them around the cardboard pieces.
12. DIY Tablet Stand Case
Trace and cut out the shape of an iPad on cardboard. Remove the cutout leaving the frame, make three pieces of this frame, glue them together and attach the iPad to it. Make the cover for it and
You May Also Like:25 DIY Tablet Stand Projects - How To Make A Tablet Stand
13. DIY Knex Tablet Case
This is made from 23 White connectors, 1 Blue connector, 15 Yellow connectors, 20 Grey connectors, 6 Red connectors, 4 Light grey connectors, 3 Orange diagonal "Y" connectors, etc. Assemble the materials and get your tablet case.
14. DIY Leather Tablet Case
Get leather materials and sew some gear wheels to it. Make the leather into something like a pocket and sew. It is made from leather, a sewing machine, gear wheel, and thread.
15. DIY Tablet Tray Case
This is made from plywood, hardwood, and wood glue. Use the plywood for the cover bottom, surround it with hardwood strips, and just like that you give your tablet case.
16. DIY Tablet Foam Case
This is made from foam, cutter, glue gun, and coin. Trace the tablet on the foam and add one inch to it to make two copies of this join them together with the glue gun and you have your tablet case.
17. DIY Quick Tablet Case
This is very fast and easy to make. Get a book cover and glue Elastic on one side then felt on the other side. Hang the tablet with the elastic and you have your tablet case.
18. DIY Tablet Case Stand Out Of Cardboard
Measure the dimension of the tablet and use it to cut cardboard, remove the cutout and make your pieces of the frame. Glue the pieces together and place the tablet in it. Make a cover for the tablet and you're good to go.
19. DIY Tablet Case
This was made from felt, fabrics, cardboard, fabric glue, and scissors. Cut two pieces of cardboard the size of the tablet and glue the fabric to it. Attach the tablet to the fabric after it is done.
20. How To Make A DIY Tablet Case
This is made from fabrics, pubs, buttons, and iron. Create a template for the project to make it faster and easier. Then, cut out the necessary pieces and join them together by sewing.
21. DIY Book Case For Tablet
Get suitable cardboard for this project then cut two pieces of covers from the cardboard then wrap them in papers. Join the two pieces with a strip of cardboard. Line the cardboard covers with felt and attach your tablet.
22. DIY Tablet Sleeve
This is an amazing DIY to make it is made from fabrics, a fusible interface, and scissors. Assemble the pieces and take them to the sewing machine for sewing.
23. How To Make An iPad Case
Get two pieces of fabrics and a piece of the interface. Iron the fabrics to its front and back. Fold the rectangular fabrics to cover the tablet vertically. Then use a binding to secure the two edges of the fabric.
24. DIY Felt iPad Case
This is made from felt, pins, snaps, sewing machine, glue, and scissors. Take a square felt and fold it around the tablet, pin the size of the tablet down and take it to the sewing machine to sew the fold leaving out the small felt that remains from the fold. Glue the snaps to the fold and the remaining felt. Cover the fold with the remaining felt and you're good to go.
25. DIY Leather Tablet Case
This is made from leather that makes up the main body of the tablet case, the suede lining that gives extra padding to the leather, cutting tools, and sewing tools. All you need to do is shape the leather and line it with suede then sew the pieces together.
26. DIY Cardboard Tablet Case With Handle
This is made from cardboard, hot glue, ribbon, sharpie, and duct tape. Trace the shear of the tablet on the cardboard, measure, and cut out all the necessary pieces for the tablet case. Glue them together and allow them to dry and durable. You can attach the handle won't after the case has finished.
27. DIY No-Sew Tablet Case
The materials needed for this tablet case are cardstock, hot glue gun, fabric, and elastic. Measure the shape of the iPad and use it to cut out two pieces of card stocks, make two thin pieces of card stocks and one wider piece. Glue all these pieces to the fabric one after another. Glue the elastic to the cardstock to hold your tablet in place.
28. DIY Tablet Cover
This is made from cardboard, glue, fabric, and cutter. Trace and the shape of the tablet on cardboard, make two of this then make two 1.5" widths and one 2.5". Lay them on a piece of fabric with little space between them. Then start gluing them to the fabric one after another.
29. How To Crochet Tablet Case
This is made from black and white yarn, hook, and crocheting skills. Yes, this requires you to know how to make crochet. Crochet a long twine and use it to size your iPad, Mark the size and use that as the width size of the road case. Mix the black and white yarn while crocheting.
30. How To Make An Ipad Case Out Of Magazines
Get a clear cover of an iPad and trace it on cardstock. Cut the pieces of magazine into thin straps and glue them to cardstock, take the cardstock to the machine and shred the pieces then take out the colorful ones and glue them to the shape of an iPad clear cover on cardstock.
Conclusion
That’s a wrap! This compilation has some of the most beautiful DIY tablet cases I have ever seen. With the materials and tools handy you too can make any of the projects above for your iPad or Android tablet. Do not forget to take measurements to get a proper fitting tablet case. Thanks for stopping by!
Rate this post
143 Shares
